1.超载运行,液压升降机在超载情况下会对油缸及电机造成沉重负担,久之运行,很容易造成机身温度偏高,应及时卸载,控制在额定载荷范围内。Overload operation, hydraulic lift in Shanghai under the conditions of overload will be a heavy burden on the cylinder and motor, a long run, it is easy to cause the body temperature is high, should be promptly unloaded, controlled within the scope of the rated load.
2.升降机铝材间卡住或摩擦力过大,造成这一现象的原因多是铝材间进入杂物,应当进行清理。Shanghai lift between the aluminum material is too large, the cause of this phenomenon is caused by the material into the debris, should be cleaned.
3.油缸或电机损坏,作为上海升降机的核心部分,出现温度过高,这是必须检查的。Cylinder or motor damage, as the core part of the Shanghai elevator, the temperature is too high, it is necessary to check the.
4.烈日下暴晒加之频繁工作,要掌握好时间,让上海升降机间歇性工作,在夏季连续性工作,由于散热不及时,容易烧坏电机。Under the hot sun and frequent work, must grasp the time, let Shanghai lift intermittent work, continuous work in the summer, because the heat is not timely, easy to burn out the motor.
公司名称:上海亚力升降机销售中心
联系人:王经理
电 话:021-24207189
手 机:13817496388
邮 箱:531934496@qq.com
地 址:上海市经济技术开发区
手机移动端
微信扫一扫